Categories
UML-05 wyk. 1 RGB
Local controller UML-05 version 1 RGB
CERTIFICATE:
The UML-05 RGB device is designed for the automation of belt and scraper conveyors. It controls and monitors the operation of a single conveyor or a chain of conveyors. Through the transmission bus, it is possible to monitor the operation of the conveyor or conveyor system and change the system operating parameters from a designated authorized dispatcher's position.
DESCRIPTION
The device can operate in the ELSAP-05 system, which may include the following devices:
- Microprocessor Transmission Device type UMT-05
- Local Microprocessor Device type UML-05
- Local Microprocessor Device type UML-05/m
- Local Microprocessor Device type UML-05/o
- Local Microprocessor Device type UML-05/SZ
- Local Microprocessor Device type UML-05/PO
- UBL-05 type locking device
- SKD-06 Dynamic Crusher Controller
- UGS-10, UGS-01/2, UGS-01/1 or UGS-01 system,
- UGO-86 or UGO-86/1 and ISB-89 or ISB89/1 systems – for communication, hands-free, warning signalling and blocking
FEATURES/TECHNICAL SPECIFICATION
It has the following functional features:
- full compatibility with ELFAP-05 system drivers
- identical terminal strip as in the UML-05/P controller
- 5.6” graphic display instead of EM240 monochrome display
- identical programming menu as in UML-05/P
- the same information presented on each display screen, due to the large color display in a much clearer form
- identical work algorithm as in the UML-05/P controller
- viewing cameras with Ethernet interface connected to the controller or to the mining LAN
- synoptic board equipped with 8 colored LEDs with important functions assigned
- conveyor control in four modes - central control, local control, inspection work and people driving
- reading the status of binary sensors along with line control
- speed sensor support
- emitting warning signals and broadcasting verbal messages about the reason for the blockade
- control of a conveyor with various drive and brake configurations
- reading sensors connected to the UGS-10 system
- output control in the UGS-10 system
- reading and sending authorization signals for a chain of conveyors by voltage or via a transmission bus (LAP)
- control and full configuration via transmission bus (MODBUS protocol)
- display of all current parameters and locks on the graphic display
- archiving the reasons for blockages and changes in parameters
- taking over the function of the central controller in terms of switching on and off conveyor lines
Technical data UML-05 RGB version | |
Parameter name | Value (unit) |
Rated supply voltage | 12÷15VDC |
Maximum current consumption | 1515mA |
ATEX marking | I M1 Ex ia Ma I |
Ambient temperature range | - 20°C to +40°C |
Weight max. | 20kg |
External dimensions | 660x405x225mm |
DOCUMENTATION
